HS-528

Prev: HS-558A Next: HS-518
  • Product introduction
  • Technical parameters
  • Function

HS-528 is an automatic edge banding machine with complete functions, using advanced mechanical structure, which makes the machine have more stable performance and more convenient operation. 

End cutting unit with two independent motors, for cutting the exceeding edge on the front and rear side of the panel.  Buffing unit is for cleaning of the edge, it's constituted by two independent motors and two cotton polishing wheels.

主要技术参数HS-528
板料宽度
Panel width
≥80mm
板料厚度
Panel thickness
10-55mm
封边宽度
Edge width
12-63mm
最小板料长度
Min. Panel length
160mm
封带厚度
Tape thickness
0.4-3mm
进给速度
Feeding speed
12-22m/min
输入电压
In-put voltage
380V
输入频率
In-put frequency
50HZ
精修电机
Fine finishing motor
0.75W×2 , 12000~18000rpm, 200~300hz
抛光电机
Polish motor
0.37KW×2, 1350rpm
胶壶预热
Gluing pot heater
1.6KW
总功率
Total power
7.14kw
空气气压
Air pressure
0.6Mpa
机器尺寸(长×宽×高)mm
Machine dimensions(L×W×H)mm
3600×700×1500

     
 
Edge feeding unit Control panel Gluing unit
End trimming unit Fine finishing unit Buffing unit
 
+86 576 86532888    +86 576 87538666
Copyright © 2015 Zhejiang Honsun Machinery Co. LTD    All Rights Reserved.
Design & Optimize: zowee.cn